Killark
Killark
Killark

Killark products are designed to go where our customers need them to be. From the searing heat of Saudi Arabia, where heat and humidity descend like a hammer in the late afternoon, and the heat index often breaking +60 °C. To the freezing conditions of the Mayo Yukon, Canada, where it gets so cold that bare skin would instantly freeze to exposed metal in the -62 °C temperatures.

 

Safety and reliability has been the cornerstone of our business for almost a century.

 

Enclosures / OEM Solutions / Controls

 

At Killark we understand that each of our customers have different needs. Our committed employees work in combination with our clients engineering staff to ensure our enclosures meet and surpass their expectations.

 

Our extensive range of bolted and threaded enclosures are utilized daily for use with control, monitoring, detection, and automation products.

 

The Killark product portfolio of control products come in both metallic and non-metallic designs. The size and depth of the control product range enable us to provide the best solutions to your control problems.

 

Distribution and Control Equipment

 

Killark offers solutions to your distribution and control applications to both North American and IEC Standards. From lighting, trace heating and power distribution applications to complex PLC control

systems, our applications engineers have a competence to take a project from conceptual to finished goods.

 

The versatility of our product range allows us to use multiple enclosure coupling techniques to cater to all demands of our clients.

 

From single point protection to rack applications, Killark provides cost effective solutions with high quality, reliability and ease-of maintenance built in.

 

Lighting

 

Killark luminaires are suitable for the extreme environments seen world wide in industrial applications. Typical installations include oil & gas extraction, refineries, chemical, coal, food/grain, pharmaceutical, wastewater and marine.

 

Available in copper-free aluminum, fiberglass reinforced polyester, or stainless steel. Killark lighting fixtures meet and exceed the requirements for corrosive, vibration, or explosive atmospheres.

Housing styles include floods, wallpacks, linear fluorescent, and enclosed/gasketed area lighting with a range of mounting styles and Killark’s exclusive patented swing-barrel nut attachment system.

 

Killark’s lighting products encompass the latest in long life energy and labor saving LED, Induction, and Fluorescent technologies in a variety of housing types for virtually any application - the range of Killark lamp sources include:

• LED - High Brightness solder-less connected field replaceable boards

• Induction - 55 to 165Watt • HID - 35Watt HPS to 1000W Metal Halide

• Fluorescent - Linear and Compact • Signaling - LED and Xenon

• Emergency - Battery Backed Linear and Compact Fluorescent; Halogen

 

Sort by
Show result

Application
To connect threaded rigid or IMC conduit to cast hubs or drilled and tapped conduit openings


Features
Tapered threads (NPT) meet latest UL 1203 requirements

 

Suitable for use in hazardous location applications when installed according to 

NEC Articles 501.10 (Class I, Div. I & 2 Groups A,B,C,D)

NEC 502.10 (Class II, Div. I & 2, Groups EFG) 

NEC 503.10 (Class III)
UL Standards 886 and 1203

RM25.00

Application
To connect threaded rigid or IMC conduit to cast hubs or drilled and tapped conduit openings


Features
Tapered threads (NPT) meet latest UL 1203 requirements

 

Suitable for use in hazardous location applications when installed according to

NEC Articles 501.10 (Class I, Div. I & 2 Groups A,B,C,D)

NEC 502.10 (Class II, Div. I & 2, Groups EFG) 

NEC 503.10 (Class III)
UL Standards 886 and 1203

RM25.00

Application
To close up a tapped hole or hub

 

Features
Threaded hubs (NPT)

RM10.00

Class I, Div. 1 & 2, Groups A, B, C, D
Class I, Zone 1, Groups IIC, IIB, IIA
Class II, Div. 1 & 2, Groups E, F, G
Class III

 

Application & Installation
Class I, Divisions 1 and 2
The purpose of seals in a Class I hazardous location is to minimize the passage of gases and vapors and prevent the passage of flames from one electrical installation to another through the conduit system.

RM150.00

Applications
GUF/GUM or UNF/UNY unions are used to connect two pieces of conduit or attach conduit to junction boxes, fittings, or devices
Permits removal of equipment without turning or removal of conduit

 

Features
Threaded for rigid conduit or IMC
Tapered threads (NPT)
Strong and durable construction

RM90.00

Applications
GUF/GUM or UNF/UNY unions are used to connect two pieces of conduit or attach conduit to junction boxes, fittings, or devices
Permits removal of equipment without turning or removal of conduit

 

Features
Threaded for rigid conduit or IMC
Tapered threads (NPT)
Strong and durable construction

RM110.00

Applications
When installed in the top of an enclosure, these fittings act as breathers which allows air flow through the enclosure. Bottom installations permit water from condensation to drain from the enclosure continuously.
The drains and breathers are offered in a variety of hub sizes, 1/4, 3/8 & 1/2 inch NPT and metric M16 & M20.

RM150.00

Applications
When installed in the bottom of a thin wall enclosure the KDE allows water from condensation to drain continuously out of the enclosure. The drain breathers are installed through clearance holes and held secured
with a internal locknut. The silicone external o ring makes a hose down tight seal.

 

Features
Silicone o-ring supplied as standard and suitable for use in a -55°C to +80°C temperature range.
Internal 316 stainless steel locknut supplied as standard. When tighten to the proper torque the joint makes a hose
down tight seal for type 4, 4X & IP66 application.

RM250.00

Applications
Elbows: To change direction in rigid or IMC conduit systems

Features
Threaded for rigid conduit or IMC
 Smooth integral bushings to prevent damage to wires

RM140.00

Application
To reduce the trade size of a taped hole or hub.

 

Features
Tapered threads (NPT)
Smooth internal bushing protects conductors
Threaded for Rigid Conduit or IMC

RM15.00

Application
To reduce the trade size of a taped hole or hub.

 

Features
Tapered threads (NPT)
Smooth internal bushing protects conductors
Threaded for Rigid Conduit or IMC

RM30.00

Sealing Materials
SC Series Sealing compound is a cement used extensively for sealing conduit to prevent the spread of explosive gases. It is non-shrinking and a secure seal is formed.


SC Series resists acids, water, oil, etc. It is UL Listed for use with Killark ENY, EY, and EYS Series. Also CSA certified for use with any CSA certified sealing fitting.

RM300.00

Killark ‘VSL’ Series LED fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4 areas where wind, water, snow or high ambients can be expected.
VSL’s are sized to replace “Utility” type fixtures (incandescent or CFL’s) in hallways, closets, elevator pits, docks, stairwells, access tunnels, and mechanical rooms.
These fixtures can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC. 

Typical applications include manufacturing plants, and certain chemical and petrochemical processing
facilities, sewage treatment plants, off-shore and dockside installations, and garage areas.

 

Long Life – 60,500+ maintenance-free hours to 70% initial lumens

RM2,250.00

Killark ‘VSL’ Series LED fixtures are designed for installations where moisture, dirt, dust, corrosion and vibration may be present, or NEMA 3 and 4 areas where wind, water, snow or high ambients can be expected.
VSL’s are sized to replace “Utility” type fixtures (incandescent or CFL’s) in hallways, closets, elevator pits, docks, stairwells, access tunnels, and mechanical rooms.
These fixtures can be used in locations made hazardous by the presence of flammable vapors or gases or combustible dusts as defined by the NEC. 

Typical applications include manufacturing plants, and certain chemical and petrochemical processing
facilities, sewage treatment plants, off-shore and dockside installations, and garage areas.

 

Long Life – 60,500+ maintenance-free hours to 70% initial lumens

RM2,250.00